I bought Digiprog 3 odometer programmer from china, and I’m happy for it now. Very pleased to work with almost models (incl. European, American and Asian cars).
Digiprog is the best handfs down low cost tool on the market I do everything from foreigns to domestics with it. Version 4.94 is good at its stability even with clone the software put into and the way the 4.94 update was prepared and by who .
Here i put the car list in the alphabetical order, better for you to check your model.
Digiprog 3 obd ok:
Audi a1 works (depending on software number)
Audi a2-obd -ok
Audi a3-repair 999999 in dash with digiprog
Audi A3 2010 by OBD OK
Audi A3 2002 obd2 is ok
Audi a3-2001-vdo-obd ok
Audi a4 2001-2005-obd ok
Audi a4 8e b6 2004 obd ok, use 2 minutes
Audi a4 2007 obd dash read ok write ok/ecu make-it via touran edc16 write 2 times to change.
Audi a4 2009 3.0quattro obd ok
Audi a4 2005-2009-obd ok
Audi A4 2010 Work
Audi a4 2012 obd ok and fast
Audi a5 2013 obd ok
Audi a5-2010-obd ok 15 min
Audi a6 c5 obd
Audi A6 2002 ok after some effort.
Audi a5 2009 3.2L obd ok 30min
Audi A6, 2009 work OBD, 4-5 minute.
Audi A6 2010 dash via obd (takes a while to find code but ok)
Audi A8 4.2 tdi 2008 Dash OBD OK 2min
Audi S3 2002 obd2 is ok
Audi TT 2002 obd2 n8 is ok
Audi q3-2010-obd ok 15 min
Audi Q5 2.0tdi 2010 by obd …20-30min
Audi Q7 2012 20 sec by obd work ok
Audi Q7 2007 —>OBD work
Audi q7-2008-obd ok
Audi tt hc 12 plug ok
BMW I8 2017 work..unit from ebay
BMW E46 2004 —> 35080 Clip Work
2001 bmw x5(e53) sure ok and also range rover with same dash. no problem.
have to take dash out and solder on back of board.
can use BMW 35080 option.
Corolla verso 2007 ok with luck
Chevrolet Montana obd ok
Chevrolet Cruze 2011 obd ok
Chevrolet Aveo 2012 obd ok
Chevrolet Corsa obd ok (after unplugging battery for a few secs)
Chevy suburban 2007 ok if you disassemble dash and read 95080 using eeprom menu then calculate manually. Will not do it by OBD. Be sure to include Km or Mi, original mileage, desired mileage and hours.
Ford transit 93c76 eeprom ok
Ford fusion hc 12 plug ok
Ford mondeo 2008-ond ok
Ford focus hc11-ok with plug
Ford focus 2006 obd ok
Ford focus 2004-2010 obd ok
Ford s-max 2009 obd ok
Ford Fiesta 2012 OBD OK (fiesta 2005 obd not ok)
Ford fiesta 2008-2010 red screen obd ok
Ford Fiesta HCS12 —> ST48 Work
Ford Mondeo 2008 Full Colour Fis 24C16 – – – OBD diag Read – 0km ,Write – OK!
Ford mondeo 2010 visteon dash with 9s12 read ok write ok via 4 wires on pcb
ford mondeo 2004 st51 read ok/write ok
Ford Bantam 2006 need nec programmer
Ford connect 2008 obd not! fvdi obd, read km but not change! dp3 ,conector 48, 9S12read and write km!
Fiat ducato 2014 obd dash ok (ecu 95640) but nyo 2015 suport
Galaxy 2008 new model by the OBD ok
Honda crv 2002 dash (68hc912)
Honda civic ep3 type r 2002 eeprom OK
Hyundai I10 (No connection i10 mcs12hy64 to digiprog ….if its 24c08 use plug 1)
Hyundai Terracan w nec, adapter st59, 100% ok, working
insignia 2011 obd ok 1min
Land Rover Discovery 4 24c16 tacho – ok
Range Rover sport 2010 24c16 tacho – ok
Range Rover evoque 2013 via obd ok
Mazda b2500 – b2900 ok
Mercedes w204 c250 2011 obd ok (Just put through as ezs, it will block sync and do dash)
Mercedes w211 2005 dash via st60 read ok/write ok/ezs sync blocked ok
Mercedes w210 obd
Mercedes w211 and do obd
Mercedes w219 works as w211 just flashes dash obd
Mercedes W251 R350 2010 ok OBD (no sync problems no can filter needed)
Mercedes class B W246 use direct in OBD
Mercedes vito 638 2003 OBD ok
Mercedes W211. Cluster is no problem via OBD. For EZS, need a cable called HC12.
Mitsubishi galant 2006 93C46 ok
Nissan navara , pathfinder motorola ST48 by points OK
2011 Nissan micra 1.5 tekna 93c66 eeprom use honda accord c66 option on digiprog same algo by desoldering and using clip st01 to read and write no need to remove needles chip on back of board
Opel Vivaro 2013 —> EEPROM Clip work 93c76
Opel Astra H —> 35080 Clip Work
Opel astra h 2006 – m35080 – work
Opel Astra 2000 obd ok
Opel insignia 2013 obd –OK
Opel Insignia 2014 —> OBD Work perfect
Opel Corsa, the digiprog working.
Opel Corsa c and astra g. Read and out new mileage in. When press tick, hold trip button and ofometer will flash. When digi says check value, release button and disconnect battery for 10sec–> Job done
Peugeot 307 2002 —> Work, Dash —> NEC (New ST59), BSI —> HC12
Porsche panamera 2014 by eeprom 95640 work ok
Saab 9-3 2009 HCS12 ok
Seat MII 2013 —> OBD Work
Skoda Superb (3t) II 2009y only by obd less then 5min
Skoda octavia 2009 1.9tdi instrument ok, ecu ok, dsg reset ok
Skoda Octavia 2010Y 1.6TDI cluster via obd
Skoda Octavia 1z 2011 OBD ok
Skoda Fabia MK2 2009 diag no problem
SKODA Fabia 2009 obd ok.
Skoda Roomster 2009 —> Diag work Perfect
Toyota yaris(2011), remove and clean chip to read/write, need luck
have to look first which eeprom on circuit my experience with some toyota that they use a small 93C46 wich is not in the menu
Volvo xc90 2007 dash ok by soldering
Volvo xc60 2009 obd ok
Vauxhalls Vivaro 2011… 93c76…. All good… read and write..
93c76 option not available under Renault Traffic so use Vivaro or maybe try Renault Master as has 93c76 option that seems as though it would work, have not tried, read ok but didn’t i write chip…
Volkswagen Eos obd2 ——ok
vw eos 2007 —> Diag obd2 work
vw polo, seat ibiza 2007 magenti marelli motorola ST48 by points OK
vw polo 2001-2005 vdo obd ok
vw polo trw plug ok
Vw fox 2007 hc912 by solder point and ST48 work
Vw touareg 2004 obd ok
Vw Tourag 2013… read ok but write failed
VW Tiguan 2007 —> OBD OK
vw tiguan 2010-2011 OBD ok
Vw AMAROK 2012 obd ok 1 min
vw bora all obd ok
vw jetta all obd ok
vw jetta 2012 work obd
vw t5 obd ok
vw t5 ecu edc 16 ok 50%50
vw touram dash obd ok
Vw Golf 4 BOO via OBD ok and Audi a4 boo crypto too
all Golf 4 without problem!!!
Vw Golf 5plus by obd -visteon dash read ok write ok
Vw Golf 6 plus 2010 work ok
vw Golf MK6 2012 works OK
all golf 6 work good till 2013 year
Vw Passat 2013 obd..ok
Vw passat 2007 obd ok
Vw passat 2008 via obd-dash read ok write ok/ecu read ok write ok 5 min.
Vw Passat CC 2.0tdi 2010y done by obd
Vw passat 2006 tdi dash & ecu obd OK
Vw passat 2001-2011 obd ok
Vw passat 2011 work obd 5 min
Vw passat 2012 work obd
Vw passat cc 2012 work obd
Vw Passat b5 2003 tdi all ok
reads 9s12 mcu with cables 48 and 51
Complicated with the EPROM of Peugeot 508 2012…
Need open dashboard, and Bsi.
Peugeot 508 have eproms. 95080 and 95256.
Read them, then put them here
Cars that Digiprog 3 FAILED to do:
Audi A3 2014 dash 8V , obd not connect
BMW X1 2013 failed… no bmw after 2002 can go by obd… have to program the 35160 chip in cluster and the cas4 (or fem?) module.
or cluster + can filter cable behind cluster to block cas. but digiprog can’t program 35160
BMW 325 e90 or x5 e53 no luck with digiprog via obd2. Cas3 just says no connection or just give me a 1349652 miles which is wrong.
GMC yukon 2001 cannot do via obd
Hyundai I10 9S12HY64 cannot work… Digipro can’t read D flash memory , so it cannot read and write this kind of mcu like Hyundai eon,Hyundai i 10 so use UPA USB can do it.
Chevrolet Cruze 2012 obd didn’t work. remove BCM next to left foot passenger seat you’ll find 24c16 ok
Mercedes W245 digiprog can’t do by obd.
use cluster plug or program chip.
first set to 999999km. then install cluster and put the car on contact for 1minute. then program cluster to any value.
It’s the same for w169
Nissan pathfinder 2000 c56 eeprom, cannot read. Had to do it with TU. Very disappoint couldnt do no 9s12 with digiprog.
Opel astra g, corsa c, zafira a, never have success to do with digiprog by obd
Opel insignia 2010 obd not work.
VW polo 2012 johnson control nec 95320 kill checksum dashboard error … (x-tool or another good tool can fix it)
VW Golf 6 2013 OBD NOT OK
Volvo xc60 obd 2013 won’t go. Only does till 2010
Note: for models with no luck, perhaps obdstar x300m is a good choice. Anyone can try it. i don’t have this)