Solution: Digimaster 3 update prompts “Connect error 11001 (0x2AF9)”

When upgraded Yanhua Digimaster 3 software, got “Connect error: 11001 (0*2AF9) ” and “DHCP was unable to oaten an IP address”.

Digimaster 3 Software Upgrade Connect error 11001 (0x2AF9)

Digimaster 3 Software Upgrade Connect error 11001 (0x2AF9)

 

Yanhua chief engineer replied:

Please do like this: tap “Management”, then “Remote Assistance” , then “Set IP”, finally tap “Automatically obtain IP”. If the IP cannot be obtained automatically, it is also possible to manually enter the correct IP address.

Digimaster 3 Software Upgrade Connect error 11001 (0x2AF9)

Digimaster 3 Software Upgrade Connect error 11001 (0x2AF9)

Digimaster 3 Software Upgrade Connect error 11001 (0x2AF9)

 

Look at this image below: This is already the latest version, do not need to upgrade.

Digimaster 3 Software Upgrade Connect error 11001 (0x2AF9)

 

Hope it helps!

 

Any questions on Yanhua Digimaster 3, contact at www.obdexpress.co.uk

Share
Share