Do odometer correction on BMW CAS 2000-2014,which tool is best?

Digimaster 3 is the best mileage correction programmer for BMW CAS 2000-2014
Now we share a 2000-2014 BMW CAS models list on mileage correction and key programming,follow the list, you can check the corresponding CAS modules.

Digimaster 3: 2000-2014 BMW CAS models
BMW Car Model CAS1
912DG128
(3K91D)
CAS2
9S12DG256
(2K79X)
CAS3
9S12DG256
(0L01Y)
CAS3+
9S12XDP512
(0L15Y)
CAS4
9S12XDP512
(1L15Y)
9S12XEP100
(5M48H)
FEM
BMW 1 Series 2004-2006
(E87)
2007(E87) 2008-2011
(E87)
2012-2014
(F20)
BMW 3 Series 2005-2006
(E90)
2007(E90) 2008-2012
(E90)
2013-2014
(F30/F35)
BMW 5 Series 2004-2006
(E60)
2007(E60) 2008-2010
(E60)
2010-2014
(F07/F10/F11/F18)
Not available yet
BMW 6 Series 2004-2007
(E63/E64)
2008(E63/E64) 2009-2010
(E63/E64)
2011-2013
(F12/F13)
Not available yet
BMW 7 Series 2001-2004
(E65)
2004-2008
(E66)
2009-2013
(F01/F02)
Not available yet
BMW X1 Series 2010-2014
(E84)
Not available yet
BMW X3 Series 2011-2013
(F25)
Not available yet
BMW X5 Series 2007(E70) 2008-2013
(E70)
2014(F15)
BMW X6 Series 2008-2014
(E71)
Not available yet Not available yet
BMW Z4 Series 2010-2013
(E89)
Not available yet Not available yet
Remark Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the board and solder to it and program it.Key programming: Support, via OBD or BDM (wiring) Mileage Correction: support,process CAS via BDM (wiring), need to remove the dashboard.
Key programming: Support, via BDM (wiring)
Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the board and solder to it and program it.Key programming: Support, via OBD or BDM (wiring) Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the dashboard and solder to it and program it.
Key programming: Support, via OBD or BDM (wiring). So far you can only program CAS3+ key via OBD.
Mileage Correction: support, process CAS via BDM (wiring), need to remove the dashboard.
Key programming: Support, via BDM (wiring). It supports up to 06/30/2016, after 06/30/2016 it is CAS4+ and it doesn’t support. For the CAS system after 2010, it comes with cpu of 5M48H.
Mileage Correction: support, process via adding FEM filter, one way is to directly add to the FEM module and another way is to add to the back of dashboard.
Key programming: Not Support

 

FacebookTwitterGoogle+PinterestLinkedInIf you like this,please share it with your friends