Only to have A605 License, by working with ACDP Module 13 or Module 21 to easily do VW/Audi gearbox mileage correction. Supports VW/Audi DQ200(0AM/0CM), DQ250(02E/0D9), DL382(0CK), VL381(0AW) mileage adjustment.
How to correct VW/Audi gearbox mileage?
Connect ACDP programmer to vehicle OBD port.
Mini ACDP>> VW >> Gearbox mileage correction >> Audi >> Detect module info
Connect ACDP with gearbox, click “OK”.
Check gearbox info, it’s DQ380(0DE).
Required Tools:
ACDP Programmer
SH725XX-0DE interface board
DB15LAN adapter
TCU cable
- Connect the interface board.
- Pull DB15LAN adapter’s button to the CAN-R side.
- Connect the power charge & vehicle gearbox.
DQ380(0DE) >> Mileage correction(auto mode) >> Continue
Check system info, original mileage:13608km
Click “Continue”.
Save EEPROM data.
Enter new mileage: 6767km
Click “OK”.
Ready to write chip data, please don’t cut the power nor pull out the device during the programming!
Click “Continue”.
Correct mileage finish.
How to correct system run time?
Time correction(auto mode) >> Continue
Check system info, system run time: 6666 hours.
Click “Continue”.
Save EEPROM data.
Enter new run time: 1206hours
OK >> Continue
Correct time finish.
Check the correction info.
Identify >> Continue
System info have been changed:
Mileage: 6767km, system run time: 1206hours.
Done.
This is how to do VW/Audi gearbox odometer correction with Yanhua ACDP.
