archive automatic identification, read pincode, read eeprom, write EEPROM, read Flash and Cluster calibration on Peugeot /Citroen/ DS models.
Follow this table:
Set an example of Peugeot BSI 2004 HO5 odometer adjustment with OBDSTAR X300DP.
Remove the Peugeot BSI 2004 HO5 type from the car.
Plug X300 DP to the VCI box and BSI box.
Select “Cluster Calibrate”, then “Peugeot”.
Select the latest version.
Warning! Please contact VCI to main unit by USB, to keep stability of vehicle communication.
BSI (cluster calibration)
Select “Auto select” or “Manual select”: If you don’t know what specific type of BSI, you can select “Auto select”, if you know the BSI type, select “Manual select”.
Select the third option “JC BSI2004-H0X”
Switch ignition on
Operate one by one: Read EEPROM, Mileage adjustment, Write EEPROM, Read Flash.
Logging in to the system…take 1-2 minutes.
Please enter a file name to save.
You should take note this file name.
Input value:… Select “OK”
The file name that you enter already exists, whether to cover? Select “Yes”
Back to select “Mileage adjustment”
Has the “Read EEPROM” and “Read Flash” functions been performed? Select “Yes”
It will take 2-60 minutes during testing, keep the vehicle fully charged and don’t unplug OBD connector.
Current mileage: 3000 km
Please confirm the mileage correctly and press ENTER to contine.
Please input the mileage of the adjustment.
Switch ignition off.
Switch ignition on.
OBDSTAR X300DP adjusts odometer on Peugeot BSI 2004 HO5 successfully.