Buick GL8 2018 24C32 Odometer Correction with CG100 EEPROM

  • obdexpress.co.uk

Purpose: Buick GL8 2018 24C32 mileage adjustment

Car model: Buick GL8 2018

Chip: 24C32 

Tool to use:

CG100 programmer

EEPROM adapter

 procedure:

Check the specific Buick car model and year.

buick-gl8-2018-24c32-mileage-program-with-cg100-01 buick-gl8-2018-24c32-mileage-program-with-cg100-02

Record the current mileage.

buick-gl8-2018-24c32-mileage-program-with-cg100-3 buick-gl8-2018-24c32-mileage-program-with-cg100-4

Power off the vehicle the vehicle, remove the BCM, confirm the eeprom chip.

buick-gl8-2018-24c32-mileage-program-with-cg100-5 buick-gl8-2018-24c32-mileage-program-with-cg100-6 buick-gl8-2018-24c32-mileage-program-with-cg100-7 buick-gl8-2018-24c32-mileage-program-with-cg100-8

Open the CG100 software, enter the corresponding operation menu, follow the software description to choose the adapter EEPROM.

buick-gl8-2018-24c32-mileage-program-with-cg100-9

Click on”Mileage (8 feet)” to enter

buick-gl8-2018-24c32-mileage-program-with-cg100-10

Selet “Buick”to enter

buick-gl8-2018-24c32-mileage-program-with-cg100-11

if the CG100 software has no GL8 model, please try the other model which has as the same GL18, for example, Encore which chip is also 24C32

Dismantle the chip 24C32, power on CG100, follow the software instructions to operate, if any problem, please contact at email Sales@OBDexpress.co.uk for assistance.

buick-gl8-2018-24c32-mileage-program-with-cg100-12 buick-gl8-2018-24c32-mileage-program-with-cg100-13 buick-gl8-2018-24c32-mileage-program-with-cg100-14

Click on “Start”(In Chinese “开始”)

buick-gl8-2018-24c32-mileage-program-with-cg100-15

Click Read(In Chinese”读取”)

CG100 is working, please do not disturb.

buick-gl8-2018-24c32-mileage-program-with-cg100-16

After Reading succeed(In Chinese”读取成功”),Click”OK”,and save (in Chinese”保存”)the original data

buick-gl8-2018-24c32-mileage-program-with-cg100-17

If the mileage that CG100 readout is close the real value, click”Adjust mileage” (In Chinese”修改里程”)and input the new
mileage, then click on “YES”(In Chinese”确定”). Otherwise, please contact CG Company

buick-gl8-2018-24c32-mileage-program-with-cg100-18

Click”Write”(In Chinese”写入”), and wait for monent

buick-gl8-2018-24c32-mileage-program-with-cg100-19

Mileage reading and writing success, install the BCM back to Buick GL8, power on the car, verify it is working.

buick-gl8-2018-24c32-mileage-program-with-cg100-20

 Done.

 Big thanks to CG100 programmer and EEPROM adapter.

Source:http://blog.obdexpress.co.uk/2019/04/20/buick-gl8-2018-24c32-mileage-program/

Share
Share