Confirmed: CG MB can do W205 FBS4 Mileage Repair for software filter version (-2018).
Do the job on the bench, need:
USB cable (connected to one computer)
16pin cable (in the package)
Power supply cable
W205 EIS + key
The ECU
The dashboard
Procedure:
Download CG MB software, open it and select “Mileage repair“, then “ FBS4 Mileage Repair – software filter version (-2018)
Connecting the device…
Close “Personal account”.
Follow the operation tips to do.
- Click on “Read mileage” button, get the dashboard number and mileage, gateway number, EIS mileage.
the dashboard mileage is : 12345KM.
- The writing process varies depending on the dashboard type, “Write” process is to modify the dashboard miles.
- Steps to install software filter:
(1). Click on “Read configuration files” (by OBD). It will take 3 minutes.
After succeed, save it into a folder on the desktop.
(2) Remove the cluster from car and connect 12V power to the CGMBvdevice, please do not supply power to the outside of the meter. Connect the mileage repair adapter and cluster then click on “Prepare flash” button (Select the configuration file saved in step 1).
Please refer to this wiring diagram below.
Insert the power adapter to CG MB and meanwhile connect to the renew adapter.
Click on “Prepare Flash”.
Choose the ” configuration files” that are saved to load.
Programming chip, please wait… until you see “Prepare for FLASH success”.
(3) Put the instrument back to the car or platform, check the OBD connection, and click to write the configuration file (select the configuration file saved in step 1).
(4) Write mileage by OBD.
New mileage: 8888km
This operation takes a long time, please connect the power supply or start the car in advance.
(5) Learning cluster to EIS by OBD.
Click on “Learn dashboard to EIS”.
(6) Clear the fault code by OBD, please power on the cluster again if the mileage has not changed.
Now the dashboard display 8888KM.
Job is done.
Big thanks to CG MB
