Digiprog 3 or Digimaster 3 – You have to read

This is for those who are looking for a decent odometer correction tool Digiprog 3 or Digimaster 3.

 

Here you go. Digiprog 3 vs. Digimaster 3

 

Analysis from the official:

Product Digiprog 3 Digimaster 3
Image digiprog-3-odometer-correction-tool original-digimaster-3-odometer-correction-tool
Original/clone Cloned Original from Yanhua
Software V4.94

Not able to update

V1.8.1707.21Update all the time
Screen Size Smaller Bigger
Language Supported English, Espanol, French, Deutsch,Portuguese, Italiano, Turkish, Dutch English
Way to change mileage By OBD2 or dashboard or Chip By OBD2 or dashboard or Chip
Update Users are not allowed to update sw by themselves.
(Need to update sw by email or send the main unit back to update.)
Original and update online by users anywhere anytime,
and it’s free to update for the first year.
Vehicle list For universal car, but cover less vehicle models than digimaster 3.
Cannot do well For Ford, For Benz, BMW, Opel , digimaster 3 can do.
The best odometer tool for universal cars (incl. high-end cars), such as Ford, BMW, Toyota, Benz, VW, Audi,Volvo,Renault,Peugeot and high-end cars.
 Vehicle year Covers vehicles from 1996 to 2013 (some can do 2014 year);

Not works for new cars in the future

Covers vehicles from 1996-2017;

Good for new cars and future cars

Tokens No tokens limited Item No.SP78 no token limitation;

Item No.SP78-B with 1080 Tokens

Function Mainly for setting and programming digital speedometer. odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz &BMW etc
Difference Digiprog 3 is good for odometer correction for most universal vehicles.

But for the new and high-end cars or new cars, you need have a Digimaster 3.

 

If you want to choose one multi-function mileage correction, Digimaster 3 is the best choice.it contains the advanced technology of programming new keys for BMW and Benz, CAS-BDM reading/writing and resetting; 35080V6 erasure etc.

 

 

Customer feedback: Digiprog 3 vs. Digimaster 3

 

Feedback 1:

I think digimaster is not worth the money (only if you do BMW). can do more digiprog, and often need to desolder.
digiprog can do a lot of cars. even mercedes 2010 by obd.
Best is to buy Yanhua digiprog if you can find them (its better quality).
The cheap digiprog from alipress often stop working. sometimes right out of the box, sometimes after 2 years.
If you’re thinking about spending 1500 euro then I’d suggest x-tool!
xtool can do more with obd (also renault kia hyundai volvo) and it can change mileage in ecu for fiat alfa lancia opel vw. also airbag crash reset and radio code read.
purpose xtool cant do w204 w212 w221 w207 ..
If you want to start and not spend more money you should buy digiprog, if you want more you can buy xtool later.

Feedback 2:

I have both digiprog and yanhua digimaster. 50% of the cars that digiprog do the digimaster does not especially VW, Audi, Benz.

30% of the cars that digiprog can not do the digimaster does. These cars are French, Italian, Japan, and China cars.

I believe that digimaster is only good for BMW cars that is all.

Not worth to buy at all. Of which waste your money. Digiprog is good for cars 2003-2009 by obd. For VW is the best tool. BENZ is ok does 2007-2009 w212, w204, w221. Audi can handle pretty good mostly a4, a6, a6 2004-2008. Risky a bit on a3.

 

FAQ: universal odometer correction tool

 

Up to which year they work with?

U2008 change mileage in the dashboard for the old car prior to 2006 year, Digiprog3 works with the newer cars up to 2012 year, so if you think Tacho universal for 100usd does all what DP3 does and think it waste money, then it is a wrong point. Digimaster 3 also works with newest vehicles.

 

What vehicles they can work?

U2008, DP3 and D3 all work with a lot of vehicle models. Their difference: DP3 can work with cars, a little part of trucks and motorcycles, such as: ford,
Fiat, vw, Audi, seat, skoda, Merc 203 and 204, bmw CAS, Peugeot, Honda Accord. Digimaster 3 can program mileage for BMW and Mercedes Benz.

Can copy digiprog 3 work with BMW and Mercedes Benz?

No, Digimaster 3 is the best mileage programmer for BMW and Mercedes Benz.

 

Which one is most powerful?

Digimaster 3 is best quality and most expensive, but it can correct odometer, decode audio, reset airbag (SRS), program ECU and program key (for Mercedes and BMW).

Digiprog3 and tacho universal are mainly used to correct mileage

 

By what way they correct mileage?

 

There are three method options to correct mileage: via diagnosis, via chip and via Micro. By which way, all the three tools main unit will prompt the user depends on specific models, at the same time it will display car model appearance, where to remove chip or Micro, what adapter to use and where the chip or Micro locates.

Take digiprog for example, when it corrects mileage for Toyota YARIS C 56, it clearly shows the car model appearance, where to remove chip in the dashboard, what adapter to use and where the dashboard chip locates.

 

How to update?

Digimaster 3: digimaster3 support sw update online.

Plug the power supply and network cable into digimaster3, click “Management”-“Update”-“Software Upgrade”, then wait it untill the screen display “Upgrade update OK”.

 

Digiprog 3: it can update, once the newest software is released, if you want to update, send the supplier serial number and they will send you an updating software. Steps: Connect the USB to the computer, start dp3,run Digiloader1.exe; Choose the right port, select Digi1.bin,click the button, then dp3 enter blue screen, if dp3 dose not enter blue screen, check the setting and restart from step 1; wait it process end, if the power supply disconnect, the unit will be damages.

Tacho Pro 2008 can’t update, after power on, don’t select “Update” and donot connect with the computer, otherwise, the screen will display “Reset”.

 

FacebookTwitterGoogle+PinterestLinkedInIf you like this,please share it with your friends