This tutorial is about how to use Digiprog III clone to do odometer mileage correction of Smart ForTwo 2007 BOX and Smart ForTwo 2007 TACHO
Part 1: Smart ForTwo 2007 BOX
Requires plug 48:
ST 48
yellow 18 yellow
green 17 green
white 7 white
brown 13 brown
SMART Model 2007 BOX
!!! ALWAYS FOLLOW THE BATTERY !!!
Remove box and disassemble.
Position of the box: driver footwell left above the steering column.
Connect the plug 48 with the marked solder points
Attention the big fuses have to be pulled to open the box; Remember slots.
Select the program: car / truck – SMART – FORTWO – BOX.
The DIGIPROG 3 indicates the old / wrong KM level.
Program the new / correct KM booth and you’re done.
The speedometer must gem.
Part 2: Smart ForTwo 2007 TACHO
Requires plug 01:
ST 1 clip 3M 923650-08
1 1
2 2
3 3
4 4
19 5
6 6
5 7
7 8
SMART FORTWO 95C640
!!! ALWAYS FOLLOW THE BATTERY !!!
Remove and disassemble the speedometer.
Carefully peel off the pointer.
Locate the chip 95C640
The designation can also be 25LC640.
ATTENTION: you have to unsolder this chip.
First, always make a backup of the chip via the EEPROMM program.
Select the program: CAR / TRUCK – SMART FORTWO – CHIP 95C640.
The DIGI PROG displays the old / wrong KM level.
Program the new / correct KM booth and you’re done.
The box must gem.
Tech support from http://blog.obdexpress.co.uk/2018/05/22/digiprog-3-smart-fortwo-2007-box-tacho/
