Have Citroen c5 x7 2011 93c76 for odometer correction, and have no idea which cable should to use (how should I) to read the course of 93c76. Please read this post.
Here:
CITROEN C5 TACHO CS 76
Requires plug 01
NOTE: The speedometer and the BSI must be programmed.
(BSI see separate instructions)
C5 speedometer C76
Remove and disassemble the speedometer. Find the chip 93C76 (see picture on the following page). Carefully remove the pointer. You should unsolder this chip. First, always make a backup of the chip via the EEPROMM program.
Select the program: Cars / Trucks – CITROEN – C5 – TACHO C76.
The DIGIPROG indicates the old / wrong KM level.
Program the new / correct KM booth and you’re done.
Pictures on the following page
CITROEN C5 TACHO CS 76
Disassemble the defective instrument cluster as described below:
Pictures on the following page:
Digiprog3 tech support is always available at www.obdexpress.co.uk
