Yanhua ACDP Module 34 is suitable for VW MQB chip. This article will introduce how to use ACDP2 + module 34 to calibrate the mileage of VW MQB 3426+95128 chip.
Check the detailed operation guide below.
1.Turn on the power switch on the car and light up the instrument panel
2.Record the current mileage (i.e. 700 km)
3.Power on Yanhua ACDP2 and open Mini ACDP APP
4.Check the upper right corner to confirm the ACDP device has been bound
5.Click on “VW” on the main menu
6.Select VW MQB IMMO>> MQB48 (VDO/JCI-NEC34xx +95128 5A)>> ICP ODO
7.Select D70F3426+95128 and the corresponding interface board based on the type of dashboard
Here we select D70F3426-A Interface Board D70F3426+95128
Click “Help” to check the connection diagram and connect Mini ACDP 2, MQB 3426+95128 chip dashboard and Yanhua Module 34 interface board correctly (click here to check the installation guide)
8.After connection, select “Auto Mode”
9.Confirm to repair the mileage
10.Detect Pins are good contact
11.Verify the chip information
12.Read CPU data and save the data
13.Read EEPROM data and save the data
14.Verify the instrument information
15.Input the target mileage (i.e. 680)
16.Save the CPU data after the mileage has been modified
17.Save the EEPROM data after the mileage has been modified as well
18.The mileage modification is complete
19.Install the instrument panel into the car and turn on the dashboard
Now the mileage on the dashboard is 680km, which is the same as modified.
Video guide:
Kindly notice:
To perform IMMO and mileage correction for the 4th generation instrument with D70F3423 +95320 chip model, D70F3426 +95128 chip model MQB 5A instrument, RH850 series R7F701401, R7F701402, R7F701407 chip model 5A instruments, and mileage correction for RH850 series R7F701401, R7F701402, R7F701404, R7F701406, R7F701407 chip model 5C instrument:
- If you have Yanhua Mini ACDP 2 and Module 33, you can buy Module 34 (#SK247-34-F) which is cheaper.
- If you have Yanhua ACDP-2 and don’t have Module 33, you need to buy Module 34 (#SK247-34).
