Good news!!! Yanhua YH35XX Programmer & Simulator for 35128WT Read and Write has been upgraded. The programmer is the same, and the old chip clip is replaced by the new YH35XX chip clip. The prices are the same, but it’s easier and more stable to install the chip, and faster to read the chip as well.
As we all know, bmw dashboards from August 2015 are equipped with a 35160WT/ 35128WT EEPROM which is not erasable and has page-id which locks this memory to its own dashboard-micro.
If you need to correct such dashboards you CANNOT erase or substitute the original memory with recovered/ bought one. You have to emulate the original memory with our emulator.
Simple guide to install YH35XX Chip Clip:
Step 1: Confirm the position and pin definition of the original car chip welding plate, analog chip, compatible analog chip and YH35XX chip clip before installation
Step 2: Title the original car chip welding plate, analog chip or compatible analog chip at an angle of 45°and install it into the corresponding YH35XX chip clip from top to bottom
Step 3: Confirm that the original car chip welding plate, analog chip or compatible analog chip is firmly installed
Here is the overall installation effect.
How to read and write 35128WT with YH35XX Chip Clip?
It covers F classis odometer with 35128WT EEPROM, and G classis VDO odometer.
The operation guide is easy. No risk! No red dot on odometer.
Connect the YH35XX Chip Clip and YH35XX programmer, and connect into the computer
Then the independent software inside can be run directly
For more details, please refer to YH35XX programmer + Simulator User manual.
If you are interested in new upgrade Yanhua YH35XX Programmer + Simulator, don’t hesitate to order one.
https://www.obdexpress.co.uk/wholesale/yanhua-yh35xx-programmer-simulator-35128wt.html